Chauvet Tiger DMX 60 Instrukcja Operatora Pobierz pdf (Strona 24)

Page 16 - 3. Controlling dimmers and fixtures

Pearl 2008 Manual - 16th July 2007

You can select dimmers or fixtures patched to the top faders by holding

down the AVO button and pressing the Swop button for the fader

below.

Tiger: To select dimmers or fixtures patched to handles 31-60, hold

down the AVO button and press the Swop button for handle 1-

30.

3.3 Changing attributes of fixtures

Having selected the fixtures you want to control, you

then need to select the attributes (pan, tilt, colour

etc.) of that fixture that you want to change.

The attributes are selected using the buttons on the

lower right corner of the Pearl and controlled using

the wheels. The attributes you can control will vary

depending on the type of fixture you are using. For

dimmer channels, you can only change the “Dimmer”

attribute (intensity). For moving lights, you can

control the pan, tilt, colour, gobo and other functions.

Controlling pan and tilt of a fixture

 Select some fixtures using the Swop buttons

 Press Locate (the red button at the bottom right

of the console) to position the fixtures at a central

position with the lamp on (you don’t have to do

this, but it helps you see what’s happening)

 Press the Pan/Tilt attribute button

 Control the tilt using the left hand wheel and the

pan using the right hand wheel. You

should see the selected fixtures

move.

 The display area just above the

wheels shows you which attribute is

being controlled by each wheel.

Any other attribute of the fixtures you selected can be controlled by

pressing the appropriate button and turning the wheels. The display will

show which functions the left and right wheels are going to control.

Very few fixture types have the full range of attributes; if the display

doesn’t show a function when you select an attribute button, that

function is not available on the fixtures you selected.

You can view the attribute settings on the LCD screen by pressing the

View button then B [Fixture Attributes]. You can change which attribute

you are viewing by pressing a different Attribute button.

If the fixture personality supports range tables and Intelligent Attribute

Display is turned on (Hold AVO and press 1) then for some attributes,

rather than showing a percentage value above the wheels, the current

colour or gobo name will be displayed. This only happens on some

fixtures.

You can use the Dimmer attribute to control the intensity channel of the

fixture, or you can use the fader of the handle. The effect is the same.

Note: Once you have changed any attributes, all the fixtures will be

Attribute buttons

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 205 206

Komentarze do niniejszej Instrukcji

Brak uwag

Chauvet Tiger DMX 60 Instrukcja Operatora Strona 24

Komentarze do niniejszej Instrukcji